Straight Lengths

Category:

Straight Lengths

Heat Design single wall components are generally used to make the connection between a stove or cooker and the chimney. The chimney may be clay lined masonry, flexi-lined masonry or a twin walled system. Single wall components should be fitted at least three times their diameter away from combustible material.

Single wall straight lengths available in both 5” and 6” diameters and in three lengths, which can be easily combined to achieve the desired flue run. Always face the male end downwards when fitting to ensure any moisture flows down the pipe internally.

Product Code A(mm) B(mm) C(mm)
FLS1300250SØ125117.5125250
FLS1300500SØ125117.5125500
FLS1301000SØ125117.51251000
FLS1500250SØ150142.5150250
FLS1500500SØ150142.5150500
FLS1501000SØ150142.51501000

Dimensions are approximate and are subject to change without prior notice. Please double check all measurements with your retailer.

Go to Top