Straight Lengths (Including Locking Band)


Straight Lengths (Including Locking Band)

Heat Design twin wall is available in three lengths which can be easily combined to achieve the required height for the installation. Each joint is firmly secured using the locking bands supplied. All lengths must be installed with the crimped end facing downwards.

Heat Design twin wall components are insulated and can be used as an independent chimney. Twin wall flue can be used internally or externally and is completely weather proof. Twin wall flue systems must be used when passing
through any wall or floor of a building.

Heat Design twin wall flues are made from stainless steel 316 inner liner, stainless steel 304 outer liner with high density insulation in between. A minimum gap of 50mm must be maintained between Heat Design twin wall and any combustible material.


Available in Black or Silver

Product CodeA(mm)B(mm)C(mm)
FLTS1501000S1000mm pipe202150960
FLTS1500500S500mm pipe202150460
FLTS500200S200mm pipe202150160
FLTB1501000S1000mm black pipe202150960
FLTB1500500S500mm black pipe202150460
FLTB1500200S200mm black pipe202150160

Dimensions are approximate and are subject to change without prior notice. Please double check all measurements with your retailer.

Go to Top