Guy Wire Bracket


Warning: Undefined array key "ssba_bar_buttons" in /home/customer/www/ on line 598

Guy Wire Bracket

A guy wire bracket is used when the twin wall chimney protrudes more than 1.5 metres beyond its support. It is clamped to the flue body using 3 nuts, bolts and washers and allows for the fixing of guy wires to ridge stays. The guy wires are located at 120° angles around the flue. It is recommended that at least 4mm diameter high tensile wire is used. Wire not included.

Product CodeA(mm)B(mm)

Dimensions are approximate and are subject to change without prior notice. Please double check all measurements with your retailer.

Go to Top